NACE Corrosion Conference & Expo

03/24/2019 08:00 to 03/28/2019 12:00 (America/Montreal)

Nashville, United States

  


  Host: Rez Mani did a M.Eng in Engineering Physics focused on optical properties of semiconductors from McMaster University in Hamilton, Ontario. This followed by a PhD in satellite optical instrumentation from York University. After working in industry for 10 years where he worked in a multitude of optical/laser/spectroscopic projects, he returned to York University as a contract faculty and a research associate in 2011. He has also worked for Allied Scientific Pro as a consultant since 2011 and as an application scientist since 2017.

Webinar Description: Space-born instruments carry many electronic components such as FPGAs, ADCs, shift registers, SRAMs, DRAMs operation amplifiers, etc. If a space particle strikes a sensitive node of an electronic circuit, it may cause a disruption or a permanent damage. This effect is known as Single Event Effect (SEE). Testing of electronic circuits prior to space launching for radiation hardness is crucial to protect them against this danger. Although testing in particle accelerator facilities produces absolute results for the cross section of the SEE, it is expensive and can only be done in localized test centers. The laser testing of SEE using pulsed lasers of typically nano-Joules pulse energy is much easier to set up and can be done at any location. The laser beam can be focused on the Device Under Test (DUT) using a microscope objective to a spot of the order of few microns and probe different regions of the device with high resolution for occurrence of SEE. Although the absolute cross sections cannot be measured using the laser testing technique, it is assumed that the relative differences between the particle method and the laser method remain the same. Once the calibration is done in a particle testing facility, all the subsequent measurements can be done using the laser method. Therefore the laser method is a complementary method to the particle method and it is not meant to replace it. The webinar also shows a few case studies of laser SEE testing of electronic components as examples. 

Once you are registered you will be receiving a Gotomeeting or webex link and code to get in the webinar, stay tuned!  If you have any questions feel free to email ricky@alliedscientificpro.com.

About: CORROSION is the world’s largest conference and exposition on corrosion. Each year, NACE’s CORROSION conference welcomes more than 6,000 scientists, researchers, engineers, technicians,coatings inspectors and contractors, educators and students, as well as business executives and asset owners from more than 60 countries. This comprehensive conference is packed with technical information exchanges and sessions. Attendees can plan their day around a wide variety of conference offerings such as a presentation on some of the latest corrosion prevention techniques at one of our many symposia, participate in a forum discussion about best practices for corrosion mitigation, or attend one of our committee meetings to hear about current and upcoming NACE standards. After a day in technical meetings or the Exhibit Hall, you’ll find networking opportunities and receptions where you can connect with the entire global corrosion community.

Booth: TBD

What: Laser Cleaning System

Where: Nashville Music City Center, Nashville, Tennessee, USA

When: March 24th - March 28th, 2019

Website: http://nacecorrosion.org/

Where

Nashville Music City Center
201 5th Ave S
    Nashville, TN 37203
    United States

When

From 03/24/2019 08:00
To 03/28/2019 12:00

Organizer

Allied Scientific Pro
+1-800-253-4107
+1-(866) 526-4086

Social Stream

Participate on Twitter

Find out what people see and say about this event, and join the conversation.

Use this tag: #alliedscientificpro