Reserve your Lighting Navigator Rental for Lightfair International right now!
04/19/2018 14:38 to 05/11/2018 14:38 (America/Montreal)
Host: Rez Mani did a M.Eng in Engineering Physics focused on optical properties of semiconductors from McMaster University in Hamilton, Ontario. This followed by a PhD in satellite optical instrumentation from York University. After working in industry for 10 years where he worked in a multitude of optical/laser/spectroscopic projects, he returned to York University as a contract faculty and a research associate in 2011. He has also worked for Allied Scientific Pro as a consultant since 2011 and as an application scientist since 2017.
Webinar Description: Space-born instruments carry many electronic components such as FPGAs, ADCs, shift registers, SRAMs, DRAMs operation amplifiers, etc. If a space particle strikes a sensitive node of an electronic circuit, it may cause a disruption or a permanent damage. This effect is known as Single Event Effect (SEE). Testing of electronic circuits prior to space launching for radiation hardness is crucial to protect them against this danger. Although testing in particle accelerator facilities produces absolute results for the cross section of the SEE, it is expensive and can only be done in localized test centers. The laser testing of SEE using pulsed lasers of typically nano-Joules pulse energy is much easier to set up and can be done at any location. The laser beam can be focused on the Device Under Test (DUT) using a microscope objective to a spot of the order of few microns and probe different regions of the device with high resolution for occurrence of SEE. Although the absolute cross sections cannot be measured using the laser testing technique, it is assumed that the relative differences between the particle method and the laser method remain the same. Once the calibration is done in a particle testing facility, all the subsequent measurements can be done using the laser method. Therefore the laser method is a complementary method to the particle method and it is not meant to replace it. The webinar also shows a few case studies of laser SEE testing of electronic components as examples.
Details: We will be allowing customers to rent a Lighting Navigator unit for the duration of the Lightfair International Show. This will allow you to take your own measurements instantly on the show floor. Reserve your unit for Lightfair today before they are all reserved. The cost will be 50USD a day to rent the unit, and 150USD for the whole show.
You have two options:
Option 1: File a request to reserve a Lighting Navigator for Lightfair. No money down, and you will pay your rental fee at our booth #1681. There is no guarantee a unit will be available to rent
Option 2: Reserve your unit now by paying the rental fee for one day and guarantee you will have the unit for the first day of the show and possibly the whole show. You will have to pick your unit up at our booth #1681.
Reasons you need to rent a unit:
Having a Lighting Navigator while you roam the show floor will give you the opportunity to test, qualify, and analyze exhibitor's lights. The Light Navigator will provide you with all the necessary information you will need to qualify their lighting. You will be able to analyze Correlated Color Temperature (CCT), Color Rendering Index (CRI), and Illuminance (Lux). Another huge asset will be to see if their lighting passes various lighting standard from around the world. Lighting standard from North America and Asia. To name a few, CIE Lighting of indoor work places, PRC Standard for lighting design of buildings, and JIS light standard. You will also be able to compare two different companies lights side by side in our application to see which light provides a better spectrum and overall parameters for your business.