Strategies in Light

02/27/2019 17:00 to 03/01/2019 02:00 (America/Montreal)

Las Vegas, United States

  


  Host: Rez Mani did a M.Eng in Engineering Physics focused on optical properties of semiconductors from McMaster University in Hamilton, Ontario. This followed by a PhD in satellite optical instrumentation from York University. After working in industry for 10 years where he worked in a multitude of optical/laser/spectroscopic projects, he returned to York University as a contract faculty and a research associate in 2011. He has also worked for Allied Scientific Pro as a consultant since 2011 and as an application scientist since 2017.

Webinar Description: Space-born instruments carry many electronic components such as FPGAs, ADCs, shift registers, SRAMs, DRAMs operation amplifiers, etc. If a space particle strikes a sensitive node of an electronic circuit, it may cause a disruption or a permanent damage. This effect is known as Single Event Effect (SEE). Testing of electronic circuits prior to space launching for radiation hardness is crucial to protect them against this danger. Although testing in particle accelerator facilities produces absolute results for the cross section of the SEE, it is expensive and can only be done in localized test centers. The laser testing of SEE using pulsed lasers of typically nano-Joules pulse energy is much easier to set up and can be done at any location. The laser beam can be focused on the Device Under Test (DUT) using a microscope objective to a spot of the order of few microns and probe different regions of the device with high resolution for occurrence of SEE. Although the absolute cross sections cannot be measured using the laser testing technique, it is assumed that the relative differences between the particle method and the laser method remain the same. Once the calibration is done in a particle testing facility, all the subsequent measurements can be done using the laser method. Therefore the laser method is a complementary method to the particle method and it is not meant to replace it. The webinar also shows a few case studies of laser SEE testing of electronic components as examples. 

Once you are registered you will be receiving a Gotomeeting or webex link and code to get in the webinar, stay tuned!  If you have any questions feel free to email ricky@alliedscientificpro.com.

About: Celebrating our 20th year of serving the LED and lighting market, we are committed to creating an event that covers every aspect of lighting to provide an integrated, 360-degree view of the market.  Strategies in Light offers a platform where professionals can learn, collaborate, and connect face-to-face. Uniquely, we break down silos and showcase the full spectrum of lighting – from innovative technologies, to product development, to real world application.

Booth: 11121

What: Lighting Passport Smart Spectrometer, Lighting Passport Gatekeeper, Light Cube, Lighting Navigator, SRI-2000 UV Spectrometer, Integrating Spheres.

Where: Mandalay Bay Convention Center, Las Vegas, Nevada, USA

When: February 27th - March 1st, 2019

Website: https://www.strategiesinlight.com/index.html

Where

Mandalay Bay Convention Center
3950 S Las Vegas Blvd
    Las Vegas, NV 89119
    United States

When

From 02/27/2019 17:00
To 03/01/2019 02:00

Organizer

Allied Scientific Pro
+1-800-253-4107
+1-(866) 526-4086

Social Stream

Participate on Twitter

Find out what people see and say about this event, and join the conversation.

Use this tag: #alliedscientificpro