3M Particulate Respirator 8210, N95
Cet article n'est plus disponible.
NIOSH approved N95 rating
Adjustable nose clip
Nose foam
Ultrasonically welded headbands
Straps –Thermoplastic Elastomer
Nose Clip – Aluminum
Nose foam -Polyurethane
Filter – Polypropylene
Shell – Polyester
Coverweb -Polyester
Key Features
NIOSH approved N95 rating
Adjustable nose clip
Nose foam
Ultrasonically welded headbands
Material Composition
Straps –Thermoplastic Elastomer
Nose Clip – Aluminum
Nose foam -Polyurethane
Filter – Polypropylene
Shell – Polyester
Coverweb -Polyester
This respirator contains no components made from natural rubber latex
pproximate weight of product: 0.35 oz.
Country of Origin Made in the USA with globally sourced materials Use For
Use for solid particulates and liquid mists in concentrations not exceeding 10X PEL/OEL
Always follow User Instructions and use in manners as indicated
Do Not Use For
DO NOT use for gases and vapors, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4-methylene dianiline (MDA), or abrasive blasting
DO NOT use for particulate concentrations exceeding 10X PEL/OEL
DO NOT use in any manner not indicated in the User Instructions
Approvals and Standards
NIOSH approved N95 particulate respirator
Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
NIOSH approval number: TC-84A-0007
Assigned Protection Factor (APF 10) per US OSHA and Canada CSA
Ordering Information | ||||||||||||||
Description | UPC | ID # | Respirators/ Box |
Boxes/Case | Each/Case | |||||||||
Particulate Respirator 8210 |
50051138464573 | 70-0706-1439-4 | 20 | 8 | 160 |
Time Use Limitation
Replace the respirator when it becomes dirty, damaged, or difficult to breathe through.
Shelf Life and Storage
5 years from the date of manufacture
Use By date on box in MM/YYYY format
Store respirators in the original packaging, away from contaminated areas, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals
Store in temperatures between -4°F (-20°C) and +86°F (+30°C) and not exceeding 80% RH
Acceptable Fit Test Protocols
Fit Test Protocol* | Acceptable with thisproduct? | |||||
Qualitative Protocols | Saccharin | ☒ | ||||
BitrexTM | ☒ | |||||
Irritant Smoke | ☐ | |||||
Isoamyl Acetate | ☐ | |||||
Quantitative Protocols | ☒ |
WARNING!
This respirator helps reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134, including training, fit testing and medical evaluation. In Canada, CSA standard Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and the User Instructions or call 3M PSD Technical Service in USA at 1-800- 243-4630 and in Canada at 1-800-267- 4414.